or make 4 interest-free payments of $24.12
fortnightly with More info
The Visit push-button transmitter works as a wireless doorbell. When someone presses it, it will send a signal to the Visit receiver that notifies you with flashes, sounds and vibrations. It can also be used as a portable alarm to notify a relative or caregiver that you need assistance.
Use as a doorbell or a portable alarm
Choose an individual alert for each door
Adjustable radio key
Allows for multiple systems in one area
Uses a highly robust radio link
Lasts up to 2 years on a standard battery
The Visit system consists of a number of radio transmitters and receivers. The transmitters detect different events in the surrounding area and transmit a radio signal to the receivers. The receivers pick up this signal and provide indications using light, sound and/or vibration.
The transmitter determines what type of light, sound or vibration should be displayed so that the reason for the indication is evident. Read through the entire user manual first and then start to install the system.
The BE1420 Visit Pushbutton Transmitter is a radio transmitter within the Bellman Visit System for indoor use and outdoor use in sheltered locations, which transmits signals to the receivers in the Bellman Visit System when the Pushbutton (2) is pressed. The Pushbutton Transmitter can transmit different Signal Patterns to the receivers in the Visit System depending on how it has been set up.
On delivery, all Bellman Visit units are tuned to the same Radio Key. If you have a neighbour with a similar system, you can change to different Radio Keys so that you do not affect each other’s systems. If you use the Radio Key Switch (4) to change the Radio Key on this transmitter, you must also change all other units in your Visit System to the same Radio Key. Refer to the user manual for the relevant unit.
All Bellman Visit products within the same system must be tuned to the same Radio Key in order to operate as a group.
Indicators and Signals
The LED (1) lights up when the Pushbutton Transmitter transmits radio signals.
6 V PX28A alkaline 6 V PX28L lithium
LED. Combined transmission and back-up battery indicator. For further information see Indicators and Signals
Radio Key Switch
Neck strap attachment
Approximately 2 years
Active: 35 mA Idle position: < 0,05 μA
Number of Radio Keys:
64 Radio Keys as standard. Special software can be used to increase these to 256 Radio Keys in increments of 64 per software purchase. Contact the nearest supplier for further information.
The normal coverage between a transmitter and receiver in the Bellman Visit 868 System is approximately 200 metres with a clear line of sight. Coverage is reduced if walls and large objects screen off the signals. Any thick walls constructed of reinforced concrete will greatly affect coverage. The system may also be affected by radio transmitters such as TV transmitters, computers, mobile phones, etc. This means that a unit may work perfectly in one part of the room but not at all in another.
Via test button
For indoor use and outdoor use in a protected location. Will not withstand water or rain!